Was this page helpful?
Caution
You're viewing documentation for an unstable version of ScyllaDB Enterprise. Switch to the latest stable version.
Some use cases for CDC may require querying the log table periodically in short intervals. One way to do that would be to perform partition scans, where you don’t specify the partition (in this case, the stream) which you want to query, for example:
SELECT * FROM ks.t_scylla_cdc_log;
Although partition scans are convenient, they require the read coordinator to contact the entire cluster, not just a small set of replicas defined by the replication factor.
The recommended alternative is to query each stream separately:
SELECT * FROM ks.t_scylla_cdc_log WHERE "cdc$stream_id" = 0x365fd1a9ae34373954529ac8169dfb93;
With the above approach you can, for instance, build a distributed CDC consumer, where each of the consumer nodes queries only streams that are replicated to ScyllaDB nodes in proximity to the consumer node. This allows efficient, concurrent querying of streams, without putting strain on a single node due to a partition scan.
Caution
The tables mentioned in the following sections: system_distributed.cdc_generation_timestamps and system_distributed.cdc_streams_descriptions_v2 have been introduced in ScyllaDB 4.4. It is highly recommended to upgrade to 4.4 for efficient CDC usage. The last section explains how to run the below examples in ScyllaDB 4.3.
If you use CDC in ScyllaDB 4.3 and your application is constantly querying CDC log tables and using the old description table to learn about new generations and stream IDs, you should upgrade your application before upgrading to 4.4. The upgraded application should dynamically switch from using the old description table to the new description tables when the cluster is upgraded from 4.3 to 4.4. We present an example algorithm that the application can perform in the last section.
We highly recommend using the newest releases of our client CDC libraries (Java CDC library, Go CDC library, Rust CDC library). They take care of correctly querying the stream description tables and they handle the upgrade procedure for you.
To query the log table without performing partition scans, you need to know which streams to look at. For this you can use the system_distributed.cdc_generation_timestamps and system_distributed.cdc_streams_descriptions_v2 tables.
Retrieve the timestamp of the currently operating CDC generation from the cdc_generation_timestamps table. If you have a multi-node cluster, query the table with QUORUM or ALL consistency level so you don’t miss any entry:
CONSISTENCY QUORUM;
SELECT time FROM system_distributed.cdc_generation_timestamps WHERE key = 'timestamps';
The query can return multiple entries:
time
---------------------------------
2020-03-25 16:05:29.484000+0000
2020-03-25 12:44:43.006000+0000
(2 rows)
Take the highest one. In our case this is 2020-03-25 16:05:29.484000+0000.
Retrieve the list of stream IDs in the current CDC generation from the cdc_streams_descriptions_v2 table. Unfortunately, to use the time-date value in a WHERE clause, you have to modify the format of the time-date a little by removing the last three 0s before the +. In our case, the modified time-date is 2020-03-25 16:05:29.484+0000:
CONSISTENCY QUORUM;
SELECT streams FROM system_distributed.cdc_streams_descriptions_v2 WHERE time = '2020-03-25 16:05:29.484+0000';
The result consists of a number of rows (most likely returned in multiple pages, unless you turned off paging), each row containing a list of stream IDs, such as:
streams
--------------------------------------------------------------------------------------------------------------
{0x7ffe0c687fcce86e0783343730000001, 0x80000000000000010d9ee5f1f4000001, 0x800555555555555653e250f2d8000001}
{0x807ae73e07dbd4122e32d36e08000011, 0x80800000000000001facbbb618000011, 0x80838c6b76e19a1bc3581db310000011}
{0x80838c6b76e19a1c6da83d4d14000021, 0x80855555555555566d556a0a18000021, 0x808aaaaaaaaaaaabf1008f4120000021}
{0x80c5343222b6eee636e3ed42d0000031, 0x80c5555555555556efd251b0b8000031, 0x80caaaaaaaaaaaabb9bde28998000031}
...
(256 rows)
Save all stream IDs returned by the query. When we ran the example, the query returned 256 * 3 = 768 stream IDs.
Use the obtained stream IDs to query your CDC log tables:
CREATE TABLE ks.t (pk int, ck int, v int, primary key (pk, ck)) WITH cdc = {'enabled': true};
INSERT INTO ks.t (pk, ck, v) values (0, 0, 0);
SELECT * FROM ks.t_scylla_cdc_log WHERE "cdc$stream_id" = 0x7ffe0c687fcce86e0783343730000001;
SELECT * FROM ks.t_scylla_cdc_log WHERE "cdc$stream_id" = 0x80000000000000010d9ee5f1f4000001;
...
Each change will be present in exactly one of these stream IDs. When we ran the example, it was:
SELECT * FROM ks.t_scylla_cdc_log WHERE "cdc$stream_id" = 0xced00000000000009663c8dc500005a1;
cdc$stream_id | cdc$time | cdc$batch_seq_no | cdc$deleted_v | cdc$end_of_batch | cdc$operation | cdc$ttl | ck | pk | v
------------------------------------+--------------------------------------+------------------+---------------+------------------+---------------+---------+----+----+---
0xced00000000000009663c8dc500005a1 | 7a370e64-819f-11eb-c419-1f717873d8fa | 0 | null | True | 2 | null | 0 | 0 | 0
(1 rows)
Query all streams to read the entire CDC log.
As explained in CDC Stream Generations, the set of used CDC stream IDs changes whenever you bootstrap a new node. You should then query the CDC description table to read the new set of stream IDs and the corresponding timestamp.
If you’re periodically querying streams and you don’t want to miss any writes that are sent to the old generation, you should query it at least one time after the old generation stops operating (which happens when the new generation starts operating).
Keep in mind that time is relative: every node has its own clock. Therefore you should make sure that the old generation stops operating from the point of view of every node in the cluster before you query it one last time and start querying the new generation.
Suppose that cdc_generation_timestamps contains the following entries:
time
---------------------------------
2020-03-25 16:05:29.484000+0000
2020-03-25 12:44:43.006000+0000
(2 rows)
The currently operating generation’s timestamp is 2020-03-25 16:05:29.484000+0000 — the highest one in the above list. You’ve been periodically querying all streams in this generation. In the meantime, a new node is bootstrapped, hence a new generation appears:
time
---------------------------------
2020-03-25 17:21:45.360000+0000
2020-03-25 16:05:29.484000+0000
2020-03-25 12:44:43.006000+0000
(3 rows)
You should keep querying streams from generation 2020-03-25 16:05:29.484000+0000 until after you make sure that every node’s clock moved past 2020-03-25 17:21:45.360000+0000. One way to do that is to connect to each node and use the now() function:
$ cqlsh 127.0.0.1
Connected to at 127.0.0.1:9042.
[cqlsh 5.0.1 | Cassandra 3.0.8 | CQL spec 3.3.1 | Native protocol v4]
Use HELP for help.
cqlsh> select totimestamp(now()) from system.local;
system.totimestamp(system.now())
----------------------------------
2020-03-25 17:24:34.104000+0000
(1 rows)
cqlsh>
$ cqlsh 127.0.0.4
Connected to at 127.0.0.4:9042.
[cqlsh 5.0.1 | Cassandra 3.0.8 | CQL spec 3.3.1 | Native protocol v4]
Use HELP for help.
cqlsh> select totimestamp(now()) from system.local;
system.totimestamp(system.now())
----------------------------------
2020-03-25 17:24:42.038000+0000
(1 rows)
and so on. After you make sure that every node uses the new generation, you can query streams from the previous generation one last time, and then switch to querying streams from the new generation.
In ScyllaDB 4.3 the tables cdc_generation_timestamps and cdc_streams_descriptions_v2 don’t exist. Instead there is the cdc_streams_descriptions table. To retrieve all generation timestamps, instead of querying the time column of cdc_generation_timestamps using a single-partition query (i.e. using WHERE key = 'timestamps'), you would query the time column of cdc_streams_descriptions with a full range scan (without specifying a single partition):
SELECT time FROM system_distributed.cdc_streams_descriptions;
To retrieve a generation’s stream IDs, you query the streams column of cdc_streams_descriptions as follows:
SELECT streams FROM system_distributed.cdc_streams_descriptions WHERE time = '2020-03-25 16:05:29.484+0000';
All stream IDs are stored in a single row, unlike cdc_streams_descriptions_v2.
If you didn’t enable CDC on any table while using ScyllaDB 4.3 or earlier, you don’t need to understand this section. Simply upgrade to 4.4 (we recommend doing it as soon as you can) and implement your application to query streams as described above.
However, if you use CDC with ScyllaDB 4.3 and your application is periodically querying the old cdc_streams_descriptions table, you should upgrade your application before upgrading the cluster to ScyllaDB 4.4.
The upgraded application should understand both the old cdc_streams_descriptions table and the new cdc_generation_timestamps and cdc_streams_descriptions_v2 tables. It should smoothly transition from querying the old table to querying the new tables as the cluster upgrades.
When ScyllaDB upgrades from 4.3 to 4.4 it will attempt to copy descriptions of all existing generations from the old table to the new tables. This copying procedure may take a while. Until it finishes, your application should keep using the old table; it should switch as soon as it detects that the procedure is finished. To detect that the procedure is finished, you can query the system.cdc_local table: if the table contains a row with key = 'rewritten', the procedure was finished; otherwise it is still in progress.
It is possible to disable the rewriting procedure. In that case only the latest generation will be inserted to the new table and your application should act accordingly (it shouldn’t wait for the 'rewritten' row to appear but start using the new tables immediately). It is not recommended to disable the rewriting procedure and we’ve purposefully left it undocumented how to do it. This option exists only for emergencies and should be used only with the assistance of a qualified ScyllaDB engineer.
In fresh ScyllaDB 4.4 clusters (that were not upgraded from a previous version) the old description table does not exist. Thus the application should check for its existence and when it detects its absence, it should use the new tables immediately.
With the above considerations in mind, the application should behave as follows. When it wants to learn if there are new generations:
Check if the system_distributed.cdc_streams_descriptions table exists. If not, proceed to query the new tables.
Otherwise, check if system.cdc_local contains a row with key = 'rewritten'. If yes, proceed to query the new tables.
Otherwise, query the old table; the rewriting procedure is still in progress. Repeat step 2 in a few seconds; by this time the rewriting may have already finished.
You may also decide that it’s safe to switch to the new tables even though not all generations have been copied from the old table. This may be the case if your application is interested only in the latest changes in the latest generation (for example, because it queries the CDC log tables in near-real time and has already seen all past changes). In this case, the application may check that the latest generation’s timestamp is present in cdc_generation_timestamps and if it is, start using the new tables immediately.
Note that after upgrading the cluster to 4.4, all new generations (which are created when bootstrapping new nodes) appear only in the new tables. After upgrading your application and your cluster, and ensuring that either all generations have been rewritten to the new tables or that you’re not interested in the data from old generations, it is safe to remove the old description table.
Note
We highly recommend using the newest releases of our client CDC libraries (Java CDC library, Go CDC library, Rust CDC library). They take care of correctly querying the stream description tables and they handle the upgrade procedure for you.
Was this page helpful?