Was this page helpful?
Caution
You're viewing documentation for a previous version of ScyllaDB Enterprise. Switch to the latest stable version.
When CDC is enabled on a table, a corresponding CDC log table is created. Below we explain what the log table’s schema is. For now, to make the explanation simpler, we assume that the base table doesn’t use any non-frozen collection or UDT columns.
Suppose you’ve created the following table:
CREATE TABLE ks.t (
pk1 int, pk2 int,
ck1 int, ck2 int,
v int,
vs int static,
PRIMARY KEY ((pk1, pk2), ck1, ck2)
) WITH cdc = {'enabled': true};
Since CDC was enabled using WITH cdc = {'enabled':true}, Scylla automatically creates the following log table:
CREATE TABLE ks.t_scylla_cdc_log (
"cdc$stream_id" blob,
"cdc$time" timeuuid,
"cdc$batch_seq_no" int,
"cdc$operation" tinyint,
"cdc$ttl" bigint,
pk1 int, pk2 int,
ck1 int, ck2 int,
v int, "cdc$deleted_v" boolean,
vs int, "cdc$deleted_vs" boolean,
PRIMARY KEY ("cdc$stream_id", "cdc$time", "cdc$batch_seq_no")
)
The rules are:
The log table is located in the same keyspace as the base table, hence uses the same replication strategy.
The log table’s name is the base table’s name plus the “_scylla_cdc_log” suffix. For example, the t base table gets an associated t_scylla_cdc_log log table.
Each key column in the base table has a corresponding column in the log table with the same name and type. For example, the ck2 column in the base has a corresponding ck2 column in the log with type int.
Each non-key column in the base table which is atomic (i.e. not a non-frozen collection nor a non-frozen UDT column) gets 2 corresponding columns in the log table:
one with the same name and type (e.g. v int or vs int above),
one with the original name prefixed with cdc$deleted_ and of boolean type (e.g. v int has a cdc$deleted_v boolean column).
There are additional metadata columns which don’t depend on the base table columns:
cdc$stream_id of type blob, which is the partition key,
cdc$time of type timeuuid and cdc$batch_seq_no of type int, which together form the clustering key,
cdc$operation of type tinyint,
and cdc$ttl of type bigint.
Note that log columns corresponding to static columns are not themselves static. E.g. the vs int static base column has a corresponding vs int column.
When performing a modification to the base table, such as inserting or deleting a row, the change will be reflected in CDC by new entries appearing in the log table. One modification statement for the base table may cause multiple entries to appear in the log. Those depend on:
the CDC options you use (e.g. whether pre-image is enabled or not),
the write action you perform: insert, update, row deletion, range deletion, or partition deletion,
types of affected collumns (notably collections require complex handling).
There are different types of entries appearing in the CDC log:
delta entries, which describe “what has changed”,
pre-image entries, which describe “what was before”,
and post-image entries, which describe “the end result”.
To understand the basics:
start by reading about metadata columns (cdc$stream_id, cdc$time, cdc$operation, and cdc$ttl) in the sections below,
then consult the Basic operations in CDC document to understand how basic modification statements, such as single UPDATEs or DELETEs, which don’t involve collections, are reflected in CDC using delta rows.
The cdc$stream_id column, of type blob, is the log table’s partition key. Each value in this column is a stream identifier.
When a change is performed in the base table, a stream identifier is chosen for the corresponding log entries depending on two things:
the base write’s partition key,
the currently operating CDC generation which is a global property of the Scylla cluster (similar to tokens).
Partitions in the log table are called streams; within one stream, all entries are sorted according to the base table writes’ timestamps, using standard clustering key properties (note that cdc$time, which represents the time of the write, is the first part of the clustering key).
If you want to use CDC efficiently, it’s important to understand how stream IDs are managed and chosen. Consult the CDC Streams document for basic definitions and properties, CDC Stream Generations document to understand how streams are managed and how they change over time, and finally Querying CDC Streams to learn how streams can be queried efficiently, and how to find out which streams to query. Reading these documents is not a prerequisite for understanding the rest of the log table related sections.
The cdc$time column is the first part of the clustering key. The type of this column is timeuuid, which represents a so-called time-based UUID, also called a version 1 UUID. A value of this type consists of two parts: a timestamp, and “the rest”. In the case of a CDC log entry, the timestamp is equal to the timestamp of the corresponding write (more on that below), and the rest of the timeuuid value consists of randomly generated bytes so that writes with conflicting timestamps get separate entries in the log table.
Each write in Scylla has a timestamp, or possibly multiple different timestamps (which is rare), used to order the write with respect to other writes, which might be performed concurrently. The timestamp can be:
specified by the user,
generated by the used CQL driver,
or generated by the server.
The first case happens when the user directly specifies the timestamp in a CQL statement with the USING TIMESTAMP clause, like in the following example:
CREATE TABLE ks.t (pk int, ck int, a int, b int, PRIMARY KEY (pk, ck));
UPDATE ks.t USING TIMESTAMP 123 SET a = 0, b = 0 WHERE pk = 0 AND ck = 0;
The timestamp of the write above is 123. More precisely, each written cell has its own timestamp; in the example above, there are two cells written:
one in row (pk, ck) = (0, 0), in column a,
one in row (pk, ck) = (0, 0), in column b.
We can query the timestamp of a cell using the writetime CQL function:
SELECT writetime(a), writetime(b) FROM ks.t WHERE pk = 0 AND ck = 0;
returns:
writetime(a) | writetime(b)
--------------+--------------
123 | 123
(1 rows)
The other two cases happen when the user doesn’t specify a timestamp. Then it depends on your driver’s configuration whether the timestamp is generated by the driver or by the server. For example, the python driver, which is used by the cqlsh tool, has the use_client_timestamp option (True by default).
Continuing the above example, the below illustrates what happens if we don’t specify a timestamp:
UPDATE ks.t SET a = 0 WHERE pk = 0 AND ck = 0;
SELECT writetime(a), writetime(b) FROM ks.t WHERE pk = 0 AND ck = 0;
returns:
writetime(a) | writetime(b)
------------------+--------------
1584966784195982 | 123
(1 rows)
The timestamp is generated by reading the machine’s local clock (either on the client or the server, depending on your driver’s configuration) and taking the number of microseconds since the Unix epoch (00:00:00 UTC, 1 January 1970).
It is possible for a write to have multiple timestamps, but this should rarely be needed:
BEGIN UNLOGGED BATCH
UPDATE ks.t USING TIMESTAMP 1584966784195983 SET a = 0 WHERE pk = 0 AND ck = 0;
UPDATE ks.t USING TIMESTAMP 1584966784195984 SET b = 0 WHERE pk = 0 AND ck = 0;
APPLY BATCH;
SELECT writetime(a), writetime(b) FROM ks.t WHERE pk = 0 AND ck = 0;
returns:
writetime(a) | writetime(b)
------------------+------------------
1584966784195983 | 1584966784195984
(1 rows)
The cdc$time column in a CDC log entry is a timeuuid which contains the timestamp of the corresponding base table write. For example:
CREATE TABLE ks.t (pk int, ck int, a int, b int, PRIMARY KEY (pk, ck)) WITH cdc = {'enabled': true};
UPDATE ks.t SET a = 0 WHERE pk = 0 AND ck = 0;
SELECT "cdc$time" FROM ks.t_scylla_cdc_log;
returns:
cdc$time
--------------------------------------
b223c55e-6d07-11ea-7654-24e4fb3f20b9
(1 rows)
Unfortunately, there is no method to extract the exact timestamp in microseconds from the timeuuid directly in CQL. We can extract the timestamp truncated to milliseconds, using the tounixtimestamp CQL function:
SELECT tounixtimestamp("cdc$time") FROM ks.t_scylla_cdc_log;
returns:
system.tounixtimestamp(cdc$time)
----------------------------------
1584969040910
(1 rows)
To obtain an exact value in microseconds you can use the below Python snippet:
from uuid import UUID
def get_timestamp(u):
return int((UUID(u).time - 0x01b21dd213814000)/10)
For example:
print(get_timestamp('b223c55e-6d07-11ea-7654-24e4fb3f20b9'))
prints 1584969040910883. Confirm that it is indeed the write timestamp of our previous UPDATE:
SELECT writetime(a) WHERE pk = 0 AND ck = 0;
returns:
writetime(a)
------------------
1584969040910883
(1 rows)
You can also interpret the timestamp as a UTC time-date in CQL using the totimestamp CQL function:
SELECT totimestamp("cdc$time") FROM ks.t_scylla_cdc_log;
returns:
system.totimestamp(cdc$time)
---------------------------------
2020-03-23 13:10:40.910000+0000
(1 rows)
timeuuid values are compared in Scylla using the timestamp first, and the other bytes second. Thus, given two base writes whose corresponding log entries are in the same stream, the write with the higher timestamp will have its log entries appear after the lower timestamp write’s log entries. If they have the same timestamp, the ordering will be chosen randomly (because the other bytes in the timeuuid are generated randomly).
The cdc$batch_seq_no column is the second part of the clustering key. It has type int and is used to group multiple log entries which correspond to a single write, given that they have the same timestamp.
For example, suppose you perform a batch write to two different rows within the same partition:
CREATE TABLE ks.t (pk int, ck int, a int, PRIMARY KEY (pk, ck)) WITH cdc = {'enabled': true};
BEGIN UNLOGGED BATCH
UPDATE ks.t SET a = 0 WHERE pk = 0 AND ck = 0;
UPDATE ks.t SET a = 0 WHERE pk = 0 AND ck = 1;
APPLY BATCH;
SELECT "cdc$time", "cdc$batch_seq_no" FROM ks.t_scylla_cdc_log;
returns:
cdc$time | cdc$batch_seq_no
--------------------------------------+------------------
c3b851fe-6d0c-11ea-3f9b-422e11ed8da0 | 0
c3b851fe-6d0c-11ea-3f9b-422e11ed8da0 | 1
(2 rows)
Observe that two entries have appeared, corresponding to the two updates. They have the same cdc$time value since they were performed in a single write and had the same timestamp. To distinguish between them, we use the cdc$batch_seq_no column. It is unspecified which update has its entries come first (in the example above, it is unspecified whether the ck = 0 write or the ck = 1 write will have cdc$batch_seq_no = 0); from Scylla’s point of view, it doesn’t matter.
If you use different timestamps for the batch, the entries will have different timeuuids, so they won’t be grouped like above:
CREATE TABLE ks.t (pk int, ck int, a int, PRIMARY KEY (pk, ck)) WITH cdc = {'enabled': true};
BEGIN UNLOGGED BATCH
UPDATE ks.t USING TIMESTAMP 1584971217889332 SET a = 0 WHERE pk = 0 AND ck = 0;
UPDATE ks.t USING TIMESTAMP 1584971217889333 SET a = 0 WHERE pk = 0 AND ck = 1;
APPLY BATCH;
SELECT "cdc$time", "cdc$batch_seq_no" FROM ks.t_scylla_cdc_log;
returns:
cdc$time | cdc$batch_seq_no
--------------------------------------+------------------
c3b85208-6d0c-11ea-d600-dcd1bfc285c9 | 0
c3b85212-6d0c-11ea-18fd-95fe5b0e6260 | 0
(2 rows)
cdc$batch_seq_no is also used to group the pre-image entry with the delta entry, if pre-images are enabled, and similarly for post-image.
The cdc$operation column, of type int, distinguishes between delta rows, pre-image rows, and post-image rows. For delta rows, it distinguishes between different types of operations. Below is the list of possible values:
Value |
Meaning |
|---|---|
0 |
pre-image |
1 |
row update |
2 |
row insert |
3 |
row delete |
4 |
partition delete |
5 |
row range delete inclusive left bound |
6 |
row range delete exclusive left bound |
7 |
row range delete inclusive right bound |
8 |
row range delete exclusive right bound |
9 |
post-image |
Values 1-8 are for delta rows. Read about the different operations in the Basic operations in CDC document.
The cdc$ttl column has type bigint and holds the TTL of the base write, if any. Example:
CREATE TABLE ks.t (pk int, ck int, a int, PRIMARY KEY (pk, ck)) WITH cdc = {'enabled': true};
UPDATE ks.t SET a = 0 WHERE pk = 0 AND ck = 0;
UPDATE ks.t USING TTL 5 SET a = 0 WHERE pk = 0 AND ck = 0;
SELECT "cdc$ttl" FROM ks.t_scylla_cdc_log;
returns:
cdc$ttl
---------
null
5
The first row corresponds to the first update, which didn’t have a ttl specified; thus, the cdc$ttl column is null. The second update contained the USING TTL 5 clause, so the corresponding CDC log entry reflected that.
TTLs are only set for live cells, i.e. cells that have a value. You cannot specify a TTL on a dead cell. Adding a USING TTL clause when setting cells to null has no effect, hence CDC won’t show any TTL in such case, for example:
CREATE TABLE ks.t (pk int, ck int, a int, PRIMARY KEY (pk, ck)) WITH cdc = {'enabled': true};
UPDATE ks.t USING TTL 5 SET a = null WHERE pk = 0 AND ck = 0;
SELECT "cdc$ttl" FROM ks.t_scylla_cdc_log;
returns:
cdc$ttl
---------
null
Even though we have attempted to specify a TTL (USING TTL 5), it had no effect because the only updated columns were set to null (SET a = null). The UPDATE statement above is equivalent to one with the USING TTL clause removed.
This has the following consequence: if you specify a TTL with a USING TTL clause, and some of the cells set by your statement are dead (null) while the other are alive, CDC will record multiple entries: one for the dead cells, the other for the alive cells. Example:
CREATE TABLE ks.t (pk int, ck int, a int, b int, PRIMARY KEY (pk, ck)) WITH cdc = {'enabled': true};
UPDATE ks.t USING TTL 5 SET a = 0, b = null WHERE pk = 0 AND ck = 0;
SELECT "cdc$batch_seq_no", a, "cdc$deleted_a", b, "cdc$deleted_b", "cdc$ttl" FROM ks.t_scylla_cdc_log;
returns:
cdc$batch_seq_no | a | cdc$deleted_a | b | cdc$deleted_b | cdc$ttl
------------------+------+---------------+------+---------------+---------
0 | null | null | null | True | null
1 | 0 | null | null | null | 5
(2 rows)
One entry says that b was set to null (cdc$deleted_b = True) and doesn’t have a TTL, since it’s not relevant for dead cells. The other entry says that a was set to 0 (a = 0) with TTL equal to 5 (cdc$ttl = 5). The two changes were performed in a single statement and used a single timestamp, so they were grouped using the cdc$batch_seq_no column.
Truncating the base table does not automatically truncate the log table, nor vice versa.
For example, if you truncate the base table but not the log table, your log table will keep entries that describe changes to the base table which are no longer reflected in the base table.
Furthermore, if you’ve enabled the preimage option, new pre-image entries appended to the log will be calculated using the base table as it appears after truncation.
Depending on your use case, this might (or might not) lead to some unexpected results.
You may want to always keep your base and log tables in sync. If that is the case, you should truncate both tables if you truncate one of them. Preferably, such truncations should not race with concurrently performed writes, thus the following procedure should be used:
Stop writing to the base table.
Consume remaining CDC data if necessary.
Truncate the base table.
Truncate the log table.
Resume writing to the base table.
Was this page helpful?